Prices Subject To Change Without Notice

ATS Final Gear

For B18C, B16A, & B16B

   For Honda Civic Si & Acura Integra VTEC
   Final Gear Ratio of 4.928

     Model #R7A16-10 for B16A transmission (For EG6, EK4, or US Integra LS)
     Model #R7A16-11 for B18C transmission (For Integra Type R, GSR, or Civic Type R)

•    Gear ratio 10% lower than the stock (4.40)
•    Aggressive acceleration
•    Several times stronger than the stock w/special coating
•    Heat treated & shot peening applied
•    Countershaft 1st gear, needle bearings, and distance collar are included    

Honda JDM parts

 

The following Honda parts are necessary to install ATS 4.928 final drive to US transmission unless your transmission is JDM Integra Type R 98 after with 4.78 final drive.

1st gear               23421-P80-E30
Distance collar    23914-P80-E30
Needle bearing    91107-P80-E31

 

  With Honda JDM parts

 Price: $815.00

   Without Honda JDM parts

 Price: $690.00

Note: ATS final gear set does not fit B16A or B18 cable transmission

For CRX Si & Civic 4th generation Si

   Final Gear for CRX transmission
   Gear ratio of 4.73 (15:71)  for Honda CRX si &Civic (4th G)

   Specially designed for the U.S market. Excellent quality and durability.
   Made of chrome-moly and heat treated & shot peening applied.
   Will also fit 4th generation Civic Si.

 

Price: $950.00

 

For S2000

   We have finished the production of the secondary final with 1.292 ratio (24:31) vs stock ratio of (25:29) and all the inventories have been cleared.

New differential final gear set (Ring & Pinion) for S2000             Gear ratio 4.44 or 4.77


     New one is a ring & pinion set same type as the other ATS final gears. The gear sets are treated by ATS Temper Shot for the substantially increased durability. The gear ratios are 4.44 or 4.77.  The set comes with ATS reinforced bolts set (M10 x L22   x 10).       Please note that the speedometer will be off by the proportion of gear ratio change.

R7A 16-16 (4.444 teeth 40:9)  /  R7A 16-17 (4.778 teeth 43:9)

Price   $990.00

ATS 4.778 final for S2000 is available on July 19, 2004

For DC5 & RSX Type S

   Final gear for Integra DC5 type R / RSX Type S
   Gear ratio of 5.062                 R7A16-15

   ATS Temper shot is applied for a Honda (JDM) final set - Ring & Pinion.  
   To install this final to US RSX, Honda bearing 91003-PPP-004 is required.

    * Gear ratio / speed comparison (stock vs 5.062)

Price:

   $770.00,             

 

   $799.00   w/ bearing 91003-PPP-004